Farr Arm | Farr Arm HF

Farr Arm™

A Powerful, Proven and Highly Flexible Extractor

The Farr Arm is available in five models which, together with a wide range of accessories, give you almost unlimited opportunities to match its source capture capabilities to your needs. Its flexible joints make the hood easy to maneuver and locate in the right position. You can mount it on a ceiling, wall or bench, or on an extension bracket. The Farr Arm is also often used in combination with fixed or mobile air filters and can be lengthened with an extension arm.
Standard Features & Benefits
  • Easily flexed joints make hood easy to maneuver
  • Available in 5 models
  • Offering a wide range of accessories
  • Mount on ceiling, wall, bench or extension bracket
  • use in combination with fixed or mobil air filters
  • Hoods of all models can be tilted forward, backward and to the side
Five Models
Farr Arm Model Part no.
1,5 m (5 ft.) 010522135
2 m (6.7 ft) 010522235
3 m (10 ft.) 010522535
4 m H (13 ft.) 010522435
4 m V (13 ft.) 010522335

Recommended air flow • 800 m3/h
Ductin diameters • 160 mm
Connection diameter • 160 mm
Maximum Temperature • 70 degrees
The Farr Arm™–a design with ample capactiy has cleared the air in thousands of workspaces for more than 20 years. Its flexible joins make the hood easy to maneuver and locate in the right position.
© Copyright 2008, Farr Air Pollution Control